B0DIL

Atmel AT32UC3B0512, AVR32 microcontroller module with USB interface

 

Diese Seite auf deutsch...

Reusch Elektronik main sites (german)...

 

Introduction

B0DIL is a tiny interface module for an Atmel AVR32 micro controller with USB interface in TQFP64 casing. The module fits to an ordinary 64 pin dual-in-line socket. The module is helpful in experiments, development and prototyping with USB-AVR32 microcontrollers.
  • assembled with Atmel AVR microcontroller AT32UC3B0512
  • standard 64 pin dual-inline format (0.9 inch row distance)
  • any microcontroller port (USB data optional) is available by the dual in line pins
  • flexibel power supplement by USB or external, 3.3V regulator on board
  • oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator)
  • all components for basic operation onboard (such as resistors and buffer capacitors)
  • ESD protected Mini-USB connector
  • JTAG connector for in-system programming and debugging (10 pin Atmel JTAG standard)
  • directly supported by AVR Studio 5 and Atmel Studio 6

The module can be applied in any development system, such as Atmel AVR Studio and IAR Embedded Workbench® for Atmel AVR.

For In-System-Programming and debugging the Atmel AVRJTAG MKII or JTAGICE 3 and all the compatible devices can be used.

The microcontroller can be programmed in two ways:

  • By the USB interface with the present bootloader and the command line tool "batchisp" from Atmel (contained in the installation package of "FLIP").
  • Programming and debugging by JTAG interface and a suitable debugging device such as Atmel AVRJTAG MKII (or compatible such as Kee AVR JTAG MKII from Kee Electronics).

Further information:

 

You will find an overview about all USB-AVR modules here...

Technical Data

Products and Prices

The B0DIL module is available as assembled and approved device or as construction kit, equipped with AT32UC3B0512. Please note, that the construction kit will be delivered unchecked. 

PCB (not assembled)

the basic material

Construction Kit

assemble what you need

Device

checked and ready to use

This set contains:
  • printed circuit board (current revision),
    not assembled
This set contains:
  • printed circuit board,
    assembled with AT32UC3B0512 and all SMD components (unchecked)
  • all wired components
  • crystal 12.000MHz
This set contains:
  • assembled and approved device (full equipped) with AT32UC3B0512
  • crystal 12.000MHz
Price: Euro 10.00 Price: Euro 34.00 Price: Euro 35.00
Shipping cost category: A Shipping cost category: B Shipping cost category: B
Order number: B0D01 Order number: B0D02 Order number: B0D03
deliverable deliverable deliverable

USB Cable

suitable for the device

IC socket

suitable for the device

 

 
Technical data:
  • plug USB-A
  • plug USB-mini
  • USB 2.0
  • length 1.8m
IC socket
  • 64 pins
  • precision contact
 
Price: Euro 2.00 Price: Euro 2.50  
Shipping cost category: B Shipping cost category: B  
Order number: UXD02 Order number: USD64  
deliverable deliverable  

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

How to order and pay

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Order by E-Mail:
Order by FAX: +49-7541-81483

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

Downloads

The following free downloads are available:

Description

Revision

File Size

Download

Manual (english), PDF file 3 (2012-08-16) 1.6 MByte B0DIL_Manual.pdf
Programming Examples     (under development)
Module Test: Software to check the ports and the USB communication
Software for Windows® including drivers and firmware files for all supported microcontrollers
1.8 (2017-03-04) 2.7 MByte Setup_UxDIL_Check.exe
Atmel FLIP driver for 64Bit Windows 3.4.2 161 kByte atmel-flip-3.4.2-signed-driver.zip
Microsoft USBView for Windows 5.0.1.1 96 kByte usbview.exe
Microsoft USBView for Windows 6.0.6000.16386 77 kByte usbview_V6.exe

 

Links

You will find information and downloads for software modules and drivers with the following links.

Atmel AVR Tools and Software

http://www.atmel.com/dyn/products/product_card.asp?category_id=163&family_id=607&subfamily_id=2138&part_id=4176

Atmel Corporation, AVR data sheets

http://www.atmel.com/dyn/products/product_docs.asp?category_id=163&family_id=607&subfamily_id=2138&part_id=4176

Atmel Application Note AVR282: Information about "Atmel FLIP" http://www.atmel.com/dyn/resources/prod_documents/doc7769.pdf
LibUSB-Win32, USB drivers for Microsoft Windows ® http://libusb-win32.sourceforge.net/