S64DIL-103

STM32F103 ARM Cortex M3 microcontroller module with USB interface

 

Introduction

S64DIL-103 is a tiny interface module for an STM32F103 micro controller with USB interface in LQFP64 casing. The module fits to an ordinary 64 pin dual-in-line socket. The module is helpful in experiments, development and prototyping with ARM Cortex M3 microcontrollers.
  • assembled with ST Microelectronics STM32F103RGT6 microcontroller, 1MByte flash memory, 96kByte SRAM, max. 72MHz clock frequency
  • standard 64 pin dual-inline format (0.9 inch row distance)
  • any microcontroller port (USB data and clock optional) is available by the dual in line pins
  • flexible power supplement by USB or external, 3.3V regulator on board
  • oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator)
  • all components for basic operation onboard (such as resistors and buffer capacitors)
  • ESD protected Mini-USB connector
  • JTAG/SWD connector for in-system programming and debugging (20 pin JTAG standard)
  • directly supported by all Cortex M development environments

The module can be applied in any development system, such as the free CooCox CoIDE.

For In-System-Programming and debugging the low cost ST-Link/V2 and all the compatible devices (such as Segger J-Link) can be used.

The microcontroller can be programmed in two ways:

  • By the serial interface (3.3V levels!), the present bootloader and the DfuSe software from ST.
  • Programming and debugging by JTAG/SWD interface and a suitable debugging device such as ST-Link/V2

Further information:

 

You will find an overview about all STM32 modules here...

Technical Data

Products and Prices

The S64DIL-103 module is available as assembled and approved device or as construction kit, equipped with STM32F103RGT6. Please note, that the construction kit will be delivered unchecked. 

PCB (not assembled)

the basic material

Construction Kit

assemble what you need

Device

checked and ready to use

This set contains:
  • printed circuit board (current revision),
    not assembled
This set contains:
  • printed circuit board,
    assembled with STM32F103RGT6 and all SMD components (unchecked)
  • all wired components and jumpers
  • crystal 8.000MHz
This set contains:
  • assembled and approved device (full equipped) with STM32F103RGT6
  • crystal 8.000MHz
  • jumpers
Price: Euro 10.00 Price: Euro 29.00 Price: Euro 30.00
Shipping cost category: A Shipping cost category: B Shipping cost category: B
Order number: SXD01 Order number: S6D02 Order number: S6D03
deliverable deliverable deliverable

USB Cable

suitable for the device

IC socket

suitable for the device

 

 
Technical data:
  • plug USB-A
  • plug USB-mini
  • USB 2.0
  • length 1.8m
IC socket
  • 64 pins
  • precision contact
 
Price: Euro 2.00 Price: Euro 3.70  
Shipping cost category: B Shipping cost category: B  
Order number: UXD02 Order number: USD64  
deliverable deliverable  

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

How to order and pay

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Order by E-Mail:
Order by FAX: +49-7541-81483

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

Downloads

The following free downloads are available:

Description

Revision

File Size

Download

Manual (english), PDF file   2 (2013-03-16) 1.6 MByte S64DIL-103_Manual.pdf
Module Test: Software to check the ports and the USB communication
Software for Windows® including drivers and firmware files for all supported microcontrollers
(Windows 7 to 10)
1.8.1 (2019-01-03) 7.8 MByte Setup_UxDIL_Check.exe
Microsoft USBView for Windows 5.0.1.1 96 kByte usbview.exe
Microsoft USBView for Windows 6.0.6000.16386 77 kByte usbview_V6.exe

 

Links

You will find information and downloads for software modules and drivers with the following links.

Data sheets, libraries, software and tools for the microcontroller

http://www.st.com/internet/mcu/product/247494.jsp

Free, Eclipse based, development environment

http://www.coocox.org/CooCox_CoIDE.htm

GNU tools for ARM embedded processors (ARM GCC) https://launchpad.net/gcc-arm-embedded/
STM32 tutorial and examples (german) http://www.diller-technologies.de/stm32.html