U2DIL Atmel ATMEGA32U2 (or AT90USB162), AVR microcontroller module with USB interface

U2DIL is a tiny interface module for an Atmel AVR micro controller with USB interface in TQFP32 casing. The module fits to an ordinary 28 pin dual-in-line socket. The module is helpful in experiments, development and prototyping with USB-AVR microcontrollers. assembled with Atmel AVR microcontroller ATMEGA32U2 (also available with AT90USB162) standard 28 pin dual-inline format (0.6 inch row distance) any microcontroller port (except USB data and oscillator) is available by the dual in line pins flexibel power supplement by USB or external oscillator socket onboard (suitable for crystal, 2- and 3-pin ceramic resonator) all components for basic operation onboard (such as resistors and buffer capacitors) mini-USB connector in-system programming (6 pin Atmel ISP standard) directly supported by AVR Studio 4 and 5 The module can be applied in any development system, such as Atmel AVR Studio, WinAVR and IAR Embedded Workbench® for Atmel AVR. The microcontroller can be programmed in two ways: By the USB interface with the present bootloader and the application program "Flip" from Atmel. By the in-system programming connector on the board and a suitable programming device, such as Atmel AVRISP MKII (or compatible). Further information: detail view schematic

You will find an overview about all USB-AVR modules here...

• Microcontroller: Atmel ATMEGA32U2 (also available with AT90USB162)
• supply voltage: 3.0 to 5.5V
• clock frequency: 8MHz or 16MHz (necessary for proper USB operation)
• 3 pin oscillator socket, delivered with 16.000MHz crystal
• programmable over the ISP connector and via USB (with "Atmel Flip")
• mini-USB connector
• 6 pin ISP connector
• precision contact 28 pin connector for dual-inline socket
• PCB dimensions: 36 x 18 mm²

The U2DIL module is available as assembled and approved device or as construction kit, either with ATMEGA32U2 or AT90USB162. Please note, that the construction will be delivered unchecked.

PCB (not assembled) the basic material	Construction Kit (ATMEGA32U2) assemble what you need	Device (ATMEGA32U2) checked and ready to use
This set contains: printed circuit board (current revision), not assembled	This set contains: printed circuit board, assembled with ATMEGA32U2 and all SMD components (unchecked) all wired components crystal 16.000MHz	This set contains: assembled and approved device (full equipped) with ATMEGA32U2 crystal 16.000MHz
Price: Euro 6.00	Price: Euro 18.00	Price: Euro 19.00
Shipping cost category: A	Shipping cost category: B	Shipping cost category: B
Order number: U2D01	Order number: U2D02	Order number: U2D03
deliverable	deliverable	deliverable
Construction Kit (AT90USB162) assemble what you need	Device (AT90USB162) checked and ready to use	USB Cable suitable for the device
This set contains: printed circuit board, assembled with AT90USB162 and all SMD components (unchecked) all wired components crystal 16.000MHz	This set contains: assembled and approved device (full equipped) with AT90USB162 crystal 16.000MHz	Technical data: plug USB-A plug USB-mini USB 2.0 length 1.8m
Price: Euro 17.00	Price: Euro 18.00	Price: Euro 2.00
Shipping cost category: B	Shipping cost category: B	Shipping cost category: B
Order number: U2D04	Order number: U2D05	Order number: UXD02
deliverable	deliverable	deliverable

All prices inclusive german VAT, without shipping.

Shipping costs are calculated as real costs.

You can order via E-Mail or FAX. Please give Your invoice and delivery address.

Delivery is only possible by prepayment! You will get a preliminary invoice as PDF file via E-Mail, which contains bank transfer and Paypal information. After payment the goods will be delivered.

We apologize, that we can't offer you a more comfortable way for order and payment in the moment.

More informationen about order and payment...

The following free downloads are available:

You will find information and downloads for software modules and drivers with the following links.